User manual

2.7 Power

DC Voltage: 9 – 30 V

GPS-205 @ 12V

BAND MODE (mA) Avg (A)@ Peak dBM

GSM850/900 1TX/1RX 230mA 2.10@ 32.5

1RX 105mA

Idle <10mA

GSM1800/1900 1TX/1RX 175mA 1.5@ 29.0

1RX 105mA

Idle <10mA

3.0 Installation

The instructions in this section describe the hardware installation of the GPS-205. To install the GPS-205

in a vehicle follow these steps:

 Choose a convenient location in the vehicle – either in the trunk or interior of a vehicle. Avoid

locations that might expose the GPS-205 to excessive heat or moisture.

 Hold the GPS-205 in place and mark the location for mounting screw holes

 Using the markings as a guide, drill mounting holes in those positions

 Align the GPS-205 in the drilled holes and secure it with mounting screws

The GPS

205 is

NOT

a waterproof or sealed device. Care must be taken to ensure th

the device is kept away from water and other liquids. The GPS-205 can be mounted

inside a weather proofed box if necessary.