User manual

4.0 Using the GPS207S

To run the GPS207S programming software double click on the icon on the desktop or click on the Start

button, select All Programs, select the CES Wireless Technologies folder and then click on GPS207S.

The main form will be displayed.

Figure 24: GPS207S Main Form

4.1 Configure the Com Port

The first step in using the GPS207S is to configure the com port used to communicate with the GPS207.

4.1.1 Determining the Com Port Number

With the GPS207 connected to a USB port bring up the Windows Device Manager to determine what

com port has been assigned to the GPS207. To access the Device Manager click ob the Start button and

select Control Panel. Once the Control Panel is displayed select System.