User manual

© CES Wireless Technologies Corp – 2010 Page 22 of 29
Figure 35: Save GPS207 Config File
This is the typical Windows save file dialog. Navigate to the folder where you wish to save the file. Enter
the file name and click on Save. The GPS207 configuration file extension (.207) will automatically be
appended onto the file name that was entered.
4.2.4 Exit
To exit the GPS207S application select File and then Exit. A prompt will be displayed to save the current
configuration. It is highly recommended that the configuration be saved the first time the application is
configured. Otherwise the Com Port will have to be configured again next time the application is used.
Figure 36: Save Current Configuration Dialog
Note – the GPS207S application can also be closed by clicking on the Exit button or the red X in the
upper right corner of the main application form.
4.3 Configure Menu
The Configure menu has three items on it. They are Com Port, Verify Connected and Connect New
Device.