User manual

© CES Wireless Technologies Corp – 2010 Page 25 of 29
Figure 41: GPS207S Main Form
4.5.1 Cellular System Parameters
The Cellular System Parameters contain the information necessary to connect to the cellular network.
These values are supplied by the cellular provider. The parameters are APN, User Name and Password.
Enter the information that was provided by the cellular provider. Known cellular parameters can be
selected by clicking on the button next to the APN field. When this is done the Select Network form will
be displayed.
Figure 42: Select Network
If using one of the networks on the form click on it and click OK. This will cause the cellular parameters
in the GPS207S main form to be updated with these values. If the network being used is not in the list you
will have to contact the cellular provider to obtain them.
4.5.2 Communication Parameters
The Communication Parameters contain the information required to send data to Power-Trak3 or to
FleetLinc. There are three fields: Unit Number, IP Address and Port.