Operating instructions

Trouble shooting
RF-NET Access Point 23
Trouble shooting
Symptom
Possible cause and remedy
No connection to the
locking devices can
be established.
Your connection cables are
mechanically damaged or broken.
 Check the installation for broken
wires or faulty connections.
 Check the continuity of your wires
with a suitable instrument
(multimeter, ohmmeter).
 Verify the proper functioning of the
plug-in power supply of the Access
Point with a suitable instrument
(multimeter, ohmmeter).
 Check the plug-in power supply for
mechanical damage.
 Check the signalization of the LEDs.
 Eliminate any interruptions and
correct any damage found.
 In case of mechanical damage, have
your Access Point repaired by your
CEStronics partner.
The Access Point has no connection to
the power supply and/or the network.
 Check the terminals and
connections.
 Establish missing connections.
 Check the signalization of the LEDs.