该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
PLEASE DO NOT RETURN TO STORE STOP Please do not return this product to the retailer!! We are able to assist you in ANY way If you find that you have any trouble with assembly or missing or damaged parts please contact the seller.
Before Installation Important – Please read these instructions fully before starting assembly Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all items according to the PARTS LIST and/or HARDWARE LIST shown below. Check you have all the components and tools listed on the following pages.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.com/ Step 11 Wall 17.2inch/438mm 30inch/776mm Use a pencil to mark drill points as instructed. It's important to use a level to ensure you get an even horizontal line between left and right points.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.com/ Step 14 M M M M *Glue is not included in the package to comply with safety regulations in certain shipping conditions. 1 Mx4 Step 15 Position the vanity top onto the cabinet and press firmly into place. Wipe away any excess sealant with a damp cloth. Let it stand for 24 hours.
该文档是极速PDF编辑器生成， 如果想去掉该提示,请访问并下载： http://www.jisupdfeditor.
HINGE ADJUSTMENTS 勹 0 Sideways / Tilt adjustment While supporting the weight of the door, turn the screws clockwise to move the door up anticlockwise to move the door down ! ＿＿＿＿ f) 0 Height adjustment U Turn the screw clockwise to move the door further away from the side of the cabinet anticlockwise to move the door closer to the side of the cabinet E) Forward and back adjustment - l If the gap between the back of the door and the cabinet is too small, and the door may not close fully.
