CONTENTS SAFETY INSTRUCTIONS 12 DESCRIPTION AND TERMINOLOGY 13 Complete Case 13 Complete Forend 13 Complete Barrel 14 Interchangeable Barrels 14 OPERATING INSTRUCTIONS 15 Several Principles of Firing 15 Gun Loading 15 The Safety and its Operation 16 Left-handed Modification 16 MAINTENANCE INSTRUCTIONS 17 Gun Disassembly 17 Gun Assembly 17 Cleaning the Gun 17 CONDITIONS OF GUARANTEE 18 TECHNICAL SPECIFICATIONS 19 LIST OF ILLUSTRATIONS 20 11
SAFETY INSTRUCTIONS 1. Always point the gun muzzle in a safe direction even if the gun is not loaded or loaded and locked. Pointing the gun in any other direction is inexcusable. 2. When you handle or store the gun, always make sure that the gun is locked and the chambers are empty. 3. Do not transport a loaded gun. 4. Check the cleanliness of the barrel prior to loading. 5. Do not load the gun unless your are at the firing stand or hunting has started. 6.
DESCRIPTION AND TERMINOLOGY The Over and under shotgun BRNO 801 over and under gun has been designed for hunting shooting using 12 bore cartridges, corresponding to the cartridge chambers and cartridges designed for the barrel's bore and meeting CIP regulations. The bores and length of shot chamber are engraved on the side of barrel sleeve. For shooting it is possible to use the 12-bore cartridges with various shot loading, including steel pellets according to proving mark.
Complete Barrel Model BO 801 the barrel pair consists of two independent barrels soldered into a casing assembly, soldered with a central bar in the front part. The forend hook is soldered to the lower barrel. The aiming rib is soldered to the upper barrel. The casing assembly side walls houses ejectors mechanism. The ejectors function closely relates to the cocking levers position.
OPERATING INSTRUCTIONS Several Principles of Firing - - Before you start shooting, you must clean the gun's surfaces, including both cartridge chambers and inner surfaces of barrels, and make sure everything is dry use good-quality, non-corroded cartridges only do not use cartridges that have been dropped and are dirty always wear suitable ear protectors and eyeglasses when shooting do not fire an over-oiled gun when firing a single pellet fixed chokes meet CIP regulations for cartridges designed for smoo
The Safety and its Operation You unlock the gun by shifting the safety catch forward (Fig. 2); an orange dot appears and having aimed, you fire the gun by pulling the trigger. Model BO 801 After first shooting release the trigger in forward direction so that the releasing latch is shifted under the other trigger handle. The single trigger mechanism is automatic. If you fire a cartridge in one barrel only, the other barrel can be locked by shifting the lock backwards.
MAINTENANCE INSTRUCTIONS Gun Disassembly Push away the forend latch on the unloaded and locked gun (Fig. 4) and at the same time, push the forend slightly towards the barrels. Remove the forend from barrels (Fig. 5). Hold the receiver in your right hand and the barrels in your left. Pressing the bolt handle, unlock the breech mechanism. Turn the barrels around the pin. When you have turned them by about 45°, it is possible to pull the barrels out of the pin (Fig. 6).
CONDITIONS OF GUARANTEE The manufacturer guarantees proper functioning and preciseness of the gun for two years from the date of purchase. This guarantee covers faults caused by materials, heat treatment or manufacturing. This guarantee is valid only for the first owner of the gun, who must show this Certificate stamped and signed by the retailer who sold the gun. If all the guarantee conditions have been met, transport of the gun packed in its original packaging is paid for by manufacturer.
TECHNICAL SPECIFICATIONS Model Caliber BO 801 BO 802.1 BO 802.2 BO 802.3 BO 802.4 BO 802.5 BO 802.6 BO 802.7 BO 802.8 BO 802.9 BO 802.10 BO 803.1 BO 803.3 BO 803.7 BO 803.8 BO 803.10 12 / 12 12 / 8x57 JRS 12 / 7x57 R 12 / 7x65 R 12 / 6,5x55 SE 12 / 6,5x57 R 12 / .243 Win. 12 / 9,3x74 R 12 / .308 Win. 12 / .222 Rem. 12 / .30-06 8x57 JRS / 8x57 JRS 7x65 R / 7x65 R 9,3x74 R / 9,3x74 R .308 Win. / .308 Win. .30-06 / .
LIST OF ILLUSTRATIONS 1. Gun loading 2. Setting safety to the "Safety-off" position 3. Set-trigger activation 4. Pushing away the forend latch 5. Removing forend 6. Gun disassembly 7. Gun assembly 8.