Instruction Manual

30
MAINTENANCE INSTRUCTIONS
Stripping for Cleaning - Disassembly
1. Remove the magazine. With the magazine box version, open the floorplate and remove the cartridges.
2. Shift the safety to its "SAFETY-OFF" position in order that the bolt can be manipulated.
3. Open the bolt, and after depressing the bolt stop (Fig. 10), pull the bolt rearwards out of the receiver.
4. Check that stock fastening bolts (items 88 and 90) are tight, and tighten them if necessary.
Disassembly of the Bolt
BEFORE BOLT DISASSEMBLY CHECK FOR YOURSELF THAT THE CARTRIDGE CHAMBER IS EMPTY!
Cock the firing mechanism by opening the bolt, move it slightly backwards and close it again. Press the disassembly catch (Fig. 4)
and keep it depressed, while at the same time open the bolt and move it partially rearwards with the other hand. Unscrew the bolt sleeve
together with the firing pin assembly and as already described above pull the rest of the bolt rearwards out of the receiver.
CAUTION:
Do not strip your firearm any further. If you assume that your firearm requires adjustment or repair, entrust this work to a competent
gunsmith in a specialized workshop!
Cleaning the Rifle
Clean the rifle
- Each time you use it.
- If you get your rifle wet.
- As soon as possible after shooting.
- At least once a year in a temperate climate.
- As often as once a month in a tropical climate, or other demanding environment.