Spec Sheet

*CET is a trademark of CET Fire Pumps Mfg Ltd.
75 Hector St., P.O. Box 90, Pierreville (Québec) Canada J0G 1J0 Telephone: [phone] Fax: [phone] www.fire-pump.com
SKID UNIT - FOREST PAC
ACCEPT ONLY THE BEST
ACENTURY OF ENGINEER ING FOR THE BRAVEST
A tank, a live hose reel and/or crosslay, a portable fire
pump and/or a compressed air foam system (CAFS), with
an engine: these can be combined into a single one-piece
assembly that can be slipped onto a truck bed, trailer, or
into a body and used for flowing water and or foam on a
structural fire, car fire or wildfire.
The most common wildland and urban interface fire
engines in North America combine a small truck with a
water tank and a high performance portable pump.
Municipal/industrial fire departments and all forestry fire
authorities use drop-in units. The sizes vary from 50
gallons, for an ATV, up to 500 gallons for full size trucks.
SPECIFICATIONS:
t 200 fully baffled propopylene water tank
t 6.5hp twin impeller fire pump
t 70gpm at 10psi, 40gpm at 100psi and 20gpm at 125psi
t 1.5 gallons integrated fuel tank
t Lighted control panel
t Low profile electric rewind hose reel
t 1 inch x 100 foot booster hose
t 2.5 inch tank to pump 1/4 turn ball valve
t Multiple outlets manifold
t 1.5 inch service line with cap and chain
OPTIONS:
t Increase water tank and hose reel sizes
t Pre-connect hose tray with connection
t Set of chrome outriggers with 3 ways rollers
t Scotty around the pump foam system with integrated foam cell
t Storage frame
t And many more