User's Manual

3
3.5.8 Call Service Settings....................................................................26
3.5.9 Memory Key...............................................................................27
3.5.10 MMI Filter.................................................................................28
3.5.11 DSP.........................................................................................28
3.5.12 VPN.........................................................................................29
3.6 DIAL-PEER DIAL RULE SETTING ..................................................................29
3.7 CONFIG MANAGE ..................................................................................30
3.8 UPDATE FIRMWARE................................................................................31
3.8.1 Update......................................................................................31
3.8.2 Auto Update...............................................................................32
3.9 SYSTEM MANAGE..................................................................................33
3.9.1 Account Manage.........................................................................33
3.9.2 Syslog config..............................................................................33
3.9.3 Phone Book................................................................................34
3.9.4 Time Set....................................................................................34
3.9.5 MMI SET....................................................................................35
3.9.6 Logout & Reboot.........................................................................35
4. OPERATING METHOD FOR DIALING...................................................37
4.1 HOW TO DIAL IP PHONE..........................................................................37
4.2 SET THE PHONE BEING CONNECTED TO SERVER ...............................................37
4.2.1 Set the WAN interface.................................................................37
4.2.2 SIP setting.................................................................................39
4.2.3 IAX setting.................................................................................40
4.3 HOW TO USE THE DIAL RULE?....................................................................40
4.4 VOICE MAIL ........................................................................................42
After phone is boot-up and obtains the TFTP Server address through
DHCP Sever, then phone will produce “toot-toot” sound to prompt
entering “Config ID”. After inputting ID through the numeric keyboard
and “#” for ending, phone will auto-download the config file from TFTP
Server. If the download is successful, phone will be re-boot; if failed,
15s later phone will enter into default standby status; if you do not want
to download, you can press "#" directly for entering into the default
standby status; if the download is not completed or the downloaded
config file “auto update module” has no config parameter in the “config
file name”, phone will still prompt input ting “Config ID” after re-boot.
After phone enters into the default standby status, pressing “**47”key
will make the phone auto-broadcast its own IP address.