User's Manual

4 Program key
4.1 Flash
The base unit is pick up, press store key, hear of toot sound, the message indicator
begins flashing at the same time, and the phone enter into configuration mode, after pressing
any numeric key (0 represents flash time is 1000ms, 1 represents 100ms 9 represents 900ms),
press store key again, press flash key at last; after the flash time set successfully, the phone
will give a long toot prompt sound.
The flash time set range is 100-1000ms.
4.2 Pause
Under configuration mode, redial key can be reused Pause function key.
The base unit is pick up, press store key, hear of toot sound, the message indicator
begins flashing at the same time, and the phone enter into configuration mode, after pressing
any numeric key (0 represents Pause time is 10s, 1 represents 1s 9 represents 9s), press store
key again, press Pause key at last; after the Pause time set successfully, the phone will give a
long toot prompt sound.
The Pause time set range is 1-10s
4.3 Memory key Message
The base unit is pick up, press store key, hear of toot sound, the message indicator
begins flashing at the same time, and the phone enter into configuration mode, input the
number of storage, press store key again, press Memory or Message key at last; after storage
success, the phone will give a long toot prompt sound. Otherwise if store is error, the phone
will give an alarm sound.
5 Phone function without commercial power
Ringer: the plane has a built-in buzzer; when a new call, the buzzer will give ringer prompt sound.
Pick up: according to pressing line key to pick up.
Dial: under off-hook status, the loudspeaker has received sound, can directly press keypad to dial
number.
Hung-up: after talking, press the speaker or line key to hung up.
Note: without commercial power, the base unit only supports dialing and calling, all of the
indicator cannot light up, the redial, hold, flash and handset cannot work.
6 Installing phone
Caution information
l Never install telephone or network wiring during a lightning storm.