User's Manual

10
2.2.8 Line Switch
2.2.81 Handset Line Switch
1）Suppose the line1/2 of handset is talking, the line2/1 is holding, if you want
to implement line switch, first you need to press down “Hold ”, then press down
“ON/OFF” of the choice line. You can implement line switch.
2) Suppose the line1/2 of handset is holding, the line2/1 is dialing, if you want
to switch to line1/2 talking,
first hang up line2/1, then press down “ON/OFF” of
Line1/2 or press “HOLD”. You can implement line switch.
2.2.8.2 Base unit Line Switch
Suppose the line1/2 of the base unit is talking, line2/1 is holding, press down
“line2/1” directly and switch to line2/1 talking.
2.2.9 Call park function
The “Park1” in the “Park Mode” of “Advanced SIP Setting” should be in chosen
mode(the default one is chosen default mode), config the related parameter “s”, “t”
and “p” in memory key page, call park function may use normally afterward.
2.3 Functions and setting catalog
2.3.1 Menu catalog
1) Network
2) Call Feature
3) SIP
4) DSP
5) System
6) Other Setting
2.3.2 Network
2.3.2.1 LAN
1) Bridge Mode
2) IP
3) Netmask
4) DHCP Server
◆Switch
◆DNS Relay
5) NAT
◆Switch
◆FTPalg
◆PPPTPalg
2.3.2.2 WAN
1) Status
2) Static Net
◆IP
◆NetMask
◆Gateway
◆DNS
◆DNS2