User's Manual

3
3.5.8 Call Service Settings..............................................................................................25
3.5.9 Memory Key .............................................................................................................26
3.5.10 MMI Filter................................................................................................................26
3.5.11 DSP...........................................................................................................................27
3.5.12 VPN...........................................................................................................................27
3.6 DIAL-PEER DIAL RULE SETTING ...........................................................................................28
3.7 CONFIG MANAGE .................................................................................................................29
3.8 UPDATE FIRMWARE ..............................................................................................................30
3.8.1 Update .......................................................................................................................30
3.8.2 Auto Update .............................................................................................................31
3.9 SYSTEM MANAGE .................................................................................................................32
3.9.1 Account Manage......................................................................................................32
3.9.2 Syslog config............................................................................................................32
3.9.3 Phone Book...............................................................................................................33
3.9.4 Time Set....................................................................................................................33
3.9.5 MMI SET ....................................................................................................................34
3.9.6 Logout & Reboot.....................................................................................................34
4. OPERATING METHOD FOR DIALING...............................................35
4.1 HOW TO DIAL IP PHONE ......................................................................................................35
4.2 SET THE PHONE BEING CONNECTED TO SERVER..................................................................35
4.2.1 Set the WAN interface...........................................................................................35
4.2.2 SIP setting： ............................................................................................................36
4.3 HOW TO USE THE DIAL RULE?..............................................................................................37
4.4 VOICE MAIL ..........................................................................................................................38
After phone is boot-up and obtains the TFTP Server address through
DHCP Sever, then phone will produce “toot-toot” sound to prompt
entering “Config ID”. After inputting ID through the numeric keyboard
and “#” for ending, phone will auto-download the config file from TFTP
Server. If the download is successful, phone will be re-boot; if failed,
15s later phone will enter into default standby status; if you do not want
to download, you can press "#" directly for entering into the default
standby status; if the download is not completed or the downloaded
config file “autoupdate module” has no config parameter in the “config
file name”, phone will still prompt inputting “Config ID” after re-boot.
After phone enters into the default standby status, pressing “**47”key
will make the phone auto-broadcast its own IP address.