User's Manual

37
4.3 How to use the dial rule?
E103-IP provide flexible dial rule, with different dial-rule configure, user can
easily implement the following function:
----Replace, delete or add prefix of the dial number.
----Make direct IP to IP call
----Place the call to different servers according the prefix.
You can click “Add” to add a new dial rule. Below is the detail setting of the
dial-rule:
Phone Number: The Number suit for this dial rule, can be set as full match or
prefix match. Full match means that if the number user dialed is completely the
same as this number, the call will use this dial-rule. Prefix match means that if prefix
of the number that the user dials is the same as the prefix, the call will use this
dial-rule, to distinguish from the full match case; you need to add “T” after the prefix
number in the phone number setting.
Call Mode: support SIP.
Destination (optional): call destination, can be IP or domain. Default is
0.0.0.0; in this case the call will be routed to the Public SIP server. If you set the
destination to 255.255.255.255, then the call will be routed to the private SIP server.
Also you can key other address here to make direct IP calls
Port (optional): Configure the port of the destination, default is 5060 in SIP
Alias (optional): Set up the Alias. We support four Aliases as below. Alias need
to co-work with the Del Length:
add:xxx, add prefix to the phone number, can set to reduce the dial length.
All: xxx, replace the phone number with the xxx, can use as speed dial
function.
Del: delete the first N numbers. N is set in the Del Length
rep:xxx，replace the first N numbers. N is set in the Del Length. For Example:
User wants to place a call 86633-8215555, then can set the phone number in the
dial rule as 0633T, and set the Alias as rep: 86633, and set the Del Length to 4. Then
all calls begin with 0633 will be changed to 86633 xxxxxxxx.
Suffix (optional): Configure suffix, show no suffix if not set