User's Manual

5
1. Introduction
This is the user manual of E103IP . Some configuration should be done before
use the E103 IP phone, and then it can work normally. This manual will illustrate
how to set the phone through keyboard and web service.
1.1 Overview of Hardware
1.1.1
The two RJ-45 network interface support the 10/100M Ethernet. The default
WAN interface is a DHCP Client server. Users connect the WAN interface to ADSL or
switch, and connect the LAN interface to the computer. You can use the
administrator’s user name “admin” and password “admin” to login and set.
1.1.2
Only the WAN interface supports the POE.
1.2 Overview of Software
Network Protocol Tone
l Ring Tone
l Ring Back Tone
l Dial Tone
l Busy Tone
Phone Function
l SIP v1(RFC2543)
v2(RFC3261)
l IP/TCP/UDP/RTP/RTCP
l IP/ICMP/ARP/RARP/SNTP
l TFTP Client/DHCP Client/PPPOE
Client
l Telnet/HTTP Server
l DNS Clients
Codec
l Volume Adjustment
l Speed dial key
l Phonebook
IP Assignment
l G.711： 64K bit/s(PCM)
l G.723.1： 63k/5.3k bit/s
l G.726： 16k/24k/32k/40k
bit/s(ADPCM)
l G.729A： 8k bit/s(CS-ACELP)
l G.729B： adds VAD & CNG to G.729
l IP (Static IP)
l DHCP
l PPPoE
Voice Quality Security
l HTTP 1.1 basic/digest
authentication for Web setup
l MD5 for SIP authentication
(RFC2069/RFC2617)
QoS
l VAD： Voice activity detection
l CNG： Comfortable noise generator
l LEC： Line echo canceller
l Packet Loss Compensation
l Adaptive Jitter Buffer
l QoS field
Call Function NAT Traversal
l STUN
Configuration
l Call Hold
l Call Waiting
l Call Forward
l Caller ID
l 3-way conference
l Web Browser
l Console/Telnet
l Keypad