User's Manual

3.1.4 Mute
During the call, if you do not want to let them hear your own voice, youcan press "Mute"key, so
that the other party cannot hear your voice, andyou can hear the sound of other end.
3.1.5 Memory Key
In addition to serving as a storage function, but also can be used as hold, DND,transfer and
conference function. See the web call feature function set.
3.1.6 Tripartite Conference Function
If the phone is Line1 hold, line2 in the call, press the conference key, which can achieve three
party conference.
During the three party conference, the base unit and handset cannot be switched each other.
3.1.7 Transfer
The telephone is in conversation with A, A wants to call B, you canpress the Transfer key, and
then call B, press the Transfer button again after B hooking off, the transfer function can be
achieved.
3.1.8 Call Park
After the call park feature is enabled, and Hold Key Active and Idle Hold Keyrelated parameters
are configured, we can perform the function of park. Thisfunction is only applicable to the base
unit.
3.1.9 Redial
After the base unit is stand by or the handset is off-hooked, press Redial key, the last dialed
number will be dialed out to achieve the redial function.
3.1.10 Register the Handset
Place the handset into the cradle of base unit. The “Message” LED on base unit will
blink. Initiate the handset registration. The “Message” LED on handset will also begin
to blink. At that time, if the base unit and handset have found out each other, the