Manual

ManualsBrandsCGI ManualsSensorsRTX SERIES: RAPTOR

TNOM (1) TMAX ACCEL TE-STOP (2) TNOM (1) TMAX ACCEL TE-STOP (2)

Ratio In-lbs (Nm) In-lbs (Nm) In-lbs (Nm) In-lbs (Nm) In-lbs (Nm) In-lbs (Nm)

Performance Specifications

1. All torque ratings are based upon 3,000 RPM nominal input speed, and 15,000 hours minimum service life.

2. E-STOP torque rating is limited to 1,000 occurrences.

3. Torsional Stiffness rating varies by type and ratio. Specified rating based on Metric, 5:1 ratio.

4. Efficiency rated at 3,000 RPM input speed, at Nominal Rated Torque.

5. Other ratios available.

Design Features

• Improved design for stiffness and loading

• High torque gear geometry

• Advanced materials and heat treatments

• IP65 sealed

• Mounting in any direction

• Captive input pinion

• Simplified quick installation

• NEMA and Metric configurations standard

023RTX (NEMA) / 060RTX (METRIC) 034RTX (NEMA) / 090RTX (METRIC)

Torsional Stiffness (3) 15 in-lbs/arc-min 70 in-lbs/arc-min

Gearbox Weight (lbs) 1 stage 3.3 lbs / 2 stage 3.9 lbs / 3 stage 4.7 lbs 1 stage 9.6 lbs / 2 stage 13 lbs / 3 stage 16.3 lbs

Precision Planetary Gearhead

1 STAGE

2 STAGE

3 STAGE

(5)

New Product Guide • Fall 2008

Input Speed 6500 RPM Maximum

Backlash (arc-min) 4 (1 stage), 6 (2 stage), 8 (3 stage)

IP Rating IP65

Service Life >15,000 HOURS

Efficiency (4) 1 stage >95% / 2 stage >90% / 3 stage >85%

Operating Temperature -40°F to +250°F

Shaft Loads See Tables on Page 12

4:1 395 (45) 468 (53) 947 (107) 1452 (164) 1829 (207) 3473 (392)

5:1 340 (38) 400 (45) 926 (105) 1274 (144) 1605 (181) 3316 (375)

7:1 231 (26) 280 (32) 861 (97) 863 (98) 1088 (123) 2821 (319)

10:1 150 (17) 190 (22) 720 (81) 559 (63) 704 (80) 2456 (277)

16:1 395 (45) 468 (53) 947 (107) 1452 (164) 1829 (207) 3473 (392)

20:1 395 (45) 468 (53) 947 (107) 1452 (164) 1829 (207) 3473 (392)

25:1 340 (38) 400 (45) 926 (105) 1274 (144) 1605 (181) 3316 (375)

28:1 395 (45) 468 (53) 947 (107) 1452 (164) 1829 (207) 3473 (392)

35:1 340 (38) 400 (45) 926 (105) 1274 (144) 1605 (181) 3316 (375)

40:1 395 (45) 468 (53) 947 (107) 1452 (164) 1829 (207) 3473 (392)

50:1 340 (38) 400 (45) 926 (105) 1274 (144) 1605 (181) 3316 (375)

70:1 265 (30) 320 (36) 861 (97) 993 (112) 1251 (141) 2821 (319)

100:1 175 (20) 221 (25) 720 (81) 642 (73) 810 (92) 2456 (277)

160:1 395 (45) 468 (53) 947 (107) 1452 (164) 1829 (207) 3473 (392)

280:1 395 (45) 468 (53) 947 (107) 1452 (164) 1829 (207) 3473 (392)

400:1 395 (45) 468 (53) 947 (107) 1452 (164) 1829 (207) 3473 (392)

500:1 340 (38) 400 (45) 926 (105) 1274 (144) 1605 (181) 3316 (375)

700:1 265 (30) 320 (36) 861 (97) 993 (112) 1251 (141) 2821 (319)

Summary of content (2 pages)

PAGE 1
Precision Planetary Gearhead Design Features • • • • • • • • Improved design for stiffness and loading High torque gear geometry Advanced materials and heat treatments IP65 sealed Mounting in any direction Captive input pinion Simplified quick installation NEMA and Metric configurations standard Performance Specifications 023RTX (NEMA) / 060RTX (METRIC) 034RTX (NEMA) / 090RTX (METRIC) TNOM (1) TMAX ACCEL TE-STOP (2) TNOM (1) TMAX ACCEL TE-STOP (2) Ratio In-lbs (Nm) In-lbs (Nm) In-lbs (Nm) In-
PAGE 2
Gearhead Dimensions Dimension Code Pilot Diameter (+.000/-.002 in) A Square Flange B Shaft Length C Shaft Diameter (+.0000/-.0005 in) D Pilot Length E Flange Thickness F Key Length G Key Height H Key Width (3) M Housing Diameter I Bolt Hole Diameter J Bolt Circle Diameter K Gearhead Length (1) L1 L2 L3 023RTX Inch (mm) 1.500 (38) 2.25 (57) 1.25 (32) 0.500 (12.7) 0.062 (2) 0.250 (6.4) 0.75 (19) 0.047 (1.2) 0.125 (3.18) 2.95 (75) 0.205 (5.2) 2.625 (67) 3.39 (86) 4.28 (109) 5.