User Manual

Ⅰ. Common Questions
(1) Q: What to do if the scale get inaccurate after some time of use?
A: Please calibrate it according to the instruction. (see in (4))
(2) Q: Why the reading is always fluctuating and it can’t set zero or get a
sable weighing results?
A: Please check whether your under-plate is installed reversed. The
incorrect installation will cause fluctuating reading.
See in part 1, how to install the under-plate correctly.
(3) Q: Why the 5000g scale is without calibration weights?
A: This lab scale with range from 200g-3000g all has calibration weights
except 5000g. Because the 5000g scale needs 2000g calibration weights,
which is too heavy and might damage the scale during international
shipment. If you need calibration weights, you can purchase on Amazon
easily.
Here is the link of 2kg calibration weights:
https://www.amazon.com/2000g-Calibration-Weight-Chrome-
Scales/dp/B 07SY8FV32/
(4) Q: How to calibrate?
A: Take the 1000g scale for example, please choose the correct weights
according to the scale display.
The following is one point calibration step:
1.Press and hold "CAL" until the scale displays "CAL"
2.Put the 500g calibration weights when the balance displays twinkles
500g.Remove the calibration after stabilization.If the scale displays
"0.00", it is finished.
(Friendly remind:Please kindly make sure that you place the balance on a
smooth and steady table and adjust the four black screws at the button to
make it stable.)
(5) Q: Why the panel display like the following picture and then shut
down?
CGOLDENWALL
®
HZ Electronic balance
Brand Store: https://www.amazon.com/stores/node/16348280011