Inc. SPST Plus SPDT Switching Module Specification Sheet

C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
[phone] • FAX [phone] • www.chtech.com
Relay Life (operations):
At rated load 1 x 10
7
Relay Operative Time:
6 msec (typical)
Relay Release Time:
4 msec (typical)
Power Up/Down States:
Normally open contact is open.
Power: +5V @ 1.0A typical
+12V @ 1.5A typical
Ordering Information:
Description Part Number
VX414C 11027680-0001
VXIbus Compliance
Complies with ANSI/IEEE Std. 1014-
1987 and VXIbus Rev 1.4
A16:D16 DTB Slave
Register based
No Interrupts
IACKIN tied to IACKOUT
BRX tied to BGX
Form Factor: Size C
Built-in test via register feedback
Applications
• Power Switching
• Control
• LF Signal Switching
Specifications:
Maximum Input Voltage:
Terminal to Terminal:
250 Vdc or ac
rms
Terminal to Chassis:
250 Vdc or ac
rms
Maximum Switchable Voltage:
100 Vdc, 250 Vac
rms
Maximum Switchable Current:
(DC or AC
rms
):
Form A: 5A (125 Vac, 30 Vdc)
Form C: 2A (125 Vac, 30 Vdc)
Maximum Switchable Power:
Form A: 625 Va
Form B: 250 Va
Closed Channel Resistance:
Initially ≤ 0.1 Ω
Insulation Resistance
(between any two points):
>10
8
Ω
VX414C
SPST plus SPDT
Switching Module
The VX414C 16/48-Channel
Switching Module is a C size,
Register based switching card that
provides 16 channels of SPST
(Form-A) switching and 48 channels
of SPDT (Form-C) switching. The
16 Form-A channels are rated for up
to 5 amps and the 48 Form-C
channels are rated for up to 2 amps.
MODID and Board Select indicators
are included. Module is equipped
with BIT capability and shielding.