Owner`s manual

2014 Glacier Bay 2770 Owners Manual
Please refer to the windlass’s user manual for proper installation.
9.3.3 Shorepower/Charger/Microwave-Package
Combined with the battery management system, this system helps ensure that your vessel will be ready to
fish whenever you are. The charger is located on the bulkhead under the livewell on the portside to access
open the hatch located beside the livewell compartment. The shorepower package includes a shore power
inlet and cordset (30 Amps), AC distribution panel, microwave, five (110 V) receptacles and battery
charger. Following are instructions on the function and proper use of these accessories.
1.1.1.5. Connecting
Shore Power
The shore power inlet is located on the outboard vertical wall of the starboard motorwell. Use the following
steps to help protect your vessel and yourself.
• Before connecting the cordset, turn the “AC Main” breaker and all accessory breakers to the “OFF”
position. The breakers are installed on the AC panel located on the upper galley cabinet in the cabin.
• Connect the cordset to the boat first, by plugging it into the receptacle and tightening the trim ring.
• Once these steps are completed, attach the cordset to the outlet supplied by the marina.
1.1.1.6. DisConnecting Shore Power
To disconnect the shore power cordset, reverse the procedure above.
• Turn the “AC Main” breaker and all accessory breakers to the “OFF” position.
• Unplug the cordset from the marina supplied outlet, then unscrew the trim ring and remove the cordset
from boat’s inlet.
9.3.4 Microwave
Microwave is located in the portside cabin birth. It operates exactly like a residential unit, and functions
only when you are connected to ship or shore power. Please refer to the Microwave user manual for proper
operation.
9.3.5 AC Panel
The AC distribution panel is installed in the cabin behind the helm area. This panel houses the circuit
breakers for the AC system and its accessories. The panel also contains a reverse polarity indicator. Reverse
polarity occurs when the AC power lead (black) and the AC grounded lead (white) are reversed. This can
destroy appliances and create the potential for electric shock. Therefore, after attaching the shore power,
turn the “AC MAIN” breaker “ON” first and inspect the reverse polarity indicator. If the LED indicator
remains unlit, you can engage the remaining accessory breakers. If the indicator light turns red,
immediately turn “OFF” the “AC MAIN” breaker and disconnect the shore power. Notify the marina
regarding the issue and have a trained electrician inspect your boat to determine if any damage has been
sustained by the electrical system.
9.3.6 Cruiseair Climate Control Package
Glacier Bay provides an optional Cruiseair® 8,000 BTU heating/ cooling unit with vents to the cabin and
cockpit for your comfort. The heating/air conditioning unit is mounted under the starboard cabin storage
panel located under the mattress. It can be accessed by removing the storage panel above the unit. The filter
control panel is located in this bulkhead. Follow these startup guidelines before each use of the unit:
1. Verify that the seacock located in the starboard aft bilge compartment is open.
2. Using the guidelines provided, energize the AC panel using the generator of shore power connection and
engage the corresponding circuit breaker.
Page 9-57