Operation Manual

Setup the camera

The camera ID will show up. Enter the default password 123456 and

save the settings. When the Green LED long ashes once followed by

2 short ashes, it means the direct wireless connection is success fully

established. You’ll see the camera view right now. Please go on to Step

3b. Connection via Ethernet cable.

• Connect your mobile device to your home router. Connect camera to

your home wi router using Ethernet cable then power on the camera

• Camera will take 40 seconds to connect to router, when done, Green

LED will stay ON.

• From the APP, tap the “Search” button to locate the camera. Enter the

default password123456.

• Then save the settings.

Note:

Camera ID (DID) is a set of alphanumberic characters that you can nd

on camera body. Please secure the Camera ID somewhere safe when

you complete the settings.

EC-CA-02 EC-CA-03 EC-CA-04