User`s manual

3
1. GENERAL INFORMATION
The Britony SX Water Heater is a room sealed, fanned flue, mulitpoint water heater.
T
he appliance has been designed for domestic use only and to be connected to a mains cold water supply with a minimum pres-
sure of 0.5 bar.
A permanent electrical connection is required and should be provided by use of a fused spur. The electrical supply should be via
a
double pole isolating switch with 3mm contact separation in both poles. If the appliance is installed in a bathroom the fused
spur must be located externally to the bathroom.
NOTE: UNDER THE GAS SAFETY AND USE REGS 1984, IT IS THE LAW THAT ALL GAS APPLIANCES ARE INSTALLED BY A CORGI REGISTERED
ENGINEER
.
F
AILURE TO INSTALL THE APPLIANCE IN ACCORDANCE WITH ALL CURRENT REGULATIONS WILL RESULT IN THE GUARANTEE
BECOMING VOID
.
I
N
HARD WATER AREAS THE USE OF A SCALE REDUCER IS RECOMMENDED
.
1.1 Guarantee
The guarantee on this appliance is valid for 12 months from the date of installation, provided it has been installed in accordance
with this manual, with all current regulations and used solely for the purpose described in this manual.
Failure to comply with this will result in the guarantee becoming void.
2. USER INSTRUCTIONS
2.1 Control Panel
LEGEND
1 Burner power selector
2 Water temperature selector
3 ON-OFF switch
4 Red LED to indicate a fault
5 Orange LED to indicate that
the equipment is in use
1
2
3
4 5
FIG.1
FIG.2