SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.
Contents Statement ............................................................................................................................ 2 Chapter 1 Product Intro ...................................................................................................... 3 1.1 Intro ....................................................................................................................... 3 1.2 Precaution before using battery...................................................................
Statement 2013 by ShenZhen Chainway Information Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
Chapter 1 Product Intro 1.1 Intro C72 device is a smart mobile PDA that integrated with various features such as wireless communication, data acquisition, wireless transmission, data processing and UHF scanning etc. It is configured with Andriod 8.1 OS and it possesses high reliability and expansibility. With a set of advanced data acquisition options, C72 can be operated in various industries to acquire precise and abundant datum automatically.
1.2 Precaution before using battery Do not leave battery unused for long time, no matter it is in device or inventory. If battery has been used for 6 months already, it should be check for charging function or it should be disposed correctly. The lifespan of Li-ion battery is around 2 to 3 years, it can be circularly charged for 300 to 500 times. (One full battery charge period means completely charged and completely discharged.) When Li-ion battery is not in used, it will continue discharge slowly.
1.3 Charger The charger type is GME10D-050200FGu, output voltage/current is 5V DC/2A. The plug considered as disconnect device of adapter.
1.4 Notes Note: Using the incorrect type battery has danger of explosion. Please dispose the used battery according to instructions. Note: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. Note: The adapter shall be installed near the equipment and shall be easily accessible. Note: The suitable temperature for the product and accessories is 0-10℃ to 50℃.
Chapter 2 Installation instructions 2.
Buttons instruction Button 1.Power Side button Main button 2.Function key Description Located on left side, press to ON/OFF device. Located on left side, its function can be defined by software. 4.Menu Scanning button located on both sides. There are two scanning buttons. Display main menu. 5.Home Touch it back to main screen. 6.Enter Press to confirm current selection. 7.Backspace Return to last step to setup. 3.
2.
2.3 Battery charge By using USB Type-C contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device.
2.4 Buttons and function area display C72 has 4 side buttons, 4 main buttons and trigger on pistol, UHF scanning area, 2D scanning module, HD camera and flashlight locate on the top.
Chapter 3 Call function 3.1 Calling numbers 1. Click icon . 2. Click number key to input phone numbers. 3. Click icon to call. 4. Click icon to end call. 3.2 Contacts 1. Click contacts to open contacts list. 2. Click icon to add new contacts. 3. Click icon to import/export contacts. 3.3 SMS and MMS 1. Click 2. Click 3. Click 4. Click to open message window. to input message receiver and contents. to send out messages. to add attachment pictures and videos.
Chapter 4 Barcode reader-writer 1. In App Center, to open 2D barcode scan test. 2. Press “SCAN” button or click scan key to start scanning, the parameter “Auto interval” can be adjusted. Caution: Please scan codes in correct way otherwise the scanning will be failed.
Max. radiant power: 0.6mW Wave length: 655nM IEC 60825-1 (Ed.2.0). 21CFR 1040.10 and 1040.11 standard. Chapter 5 NFC read and write 1. In App Center, open NFC to test. 2. Press “Read” button to read a NFC tag or ‘Write’ to write the NFC tag.
15
Chapter 6 RFID reader 6.1 UHF Click App Center, open “UHF” to read and write, kill and lock UHF tag.
Chapter 7 Other functions 7.1 PING tool 1. Open “PING” in App Center. 2. Setup PING parameter and select external/internal address.
7.2 Bluetooth 1. Open “BT Printer” in App Center. 2. In the list of detected devices, click the device that you want to pair. 3. Select printer and click “Print” to start printing contents.
7.3 GPS 1. Click “GPS” in App Center to open GPS test. 2. Setup GPS parameters to access GPS information.
7.4 Volume setup 1. Click “Volume” in App Center. 2. Setup volume by requirements.
7.5 Sensor 1. Click “Sensor” in App Center. 2. Setup the sensor by requirements.
7.6 Keyboard 1. Click “Keyboard” in App Center. 2. Setup and test the main value of the device.
7.7 Network 1. Click “Network” in App Center. 2. Test WIFI/Mobile signal by requirements.
7.8 Keyboard emulator (optional) The keyboard emulator can be used in multiple operating background and output formats directly. And it includes Prefix/Suffix/Enter/TAB. Please check Keyboard emulator manual for more details.
Chapter 8 Device characteristic Physical characteristics Size Weight Display Touch panel Battery Expansion Expansion Slot Audio Camera 164.2mm*78.8mm*17mm <654g(battery included) 5.
Communication WAN WWAN(Overseas) 2G: 850/900/1800/1900MHz 3G: B2,B5 4G: B2/4/5/7/12/17/25/66 IEEE802.11 a/b/g/n/ac, 2.4G/5G dual-band, internal antenna WLAN Bluetooth 4.0 WPAN The device not support the NII straddle channels: 144(20MHz), 142(40MHz), 138(80MHz) Data collection Barcode scanning RFID 2D scanning engine(Zebra SE4710/Zebra SE4750MR/Honeywell N6603) NFC 13.
Appendix 27
§ 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
SAR Information Specific Absorption Rate (SAR) information: This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.
