Instruction Manual

Issue 4 19/8/2021 6
KNOW YOUR APPLIANCE
1. Mist cover
2. Water tank
3. Base (including water reservoir)
4. Control Knob
5. Main Power switch
First time use
Filling the water tank:
We recommend using distilled water to avoid limescale build-up but if using
tap water in a hardwater area we recommend regular cleaning to avoid
limescale build-up. Make sure water temperature does not exceed 40°C.
(Put the appliance down on a suitable flat horizontal surface, and where it is to be
used.)
Note: Do not use on any surface that may be damaged by water, (during refill
some water drops may be spilt)
1. Remove the white mist cover (1) from the top of the blue water tank. Never
remove or fill the water tank with the mist cover attached.
2. Remove the blue water tank from its base and turn the tank upside-down.
3. Unscrew the filler cap with filter in the direction shown and remove.