Instruction Manual

Issue 4 19/8/2021 8
Note: If the indicator light is Red, water is still filling the water reservoir (in
the base unit), wait until it turns Blue, the unit will start working.
Warning: Whenever a filled water tank is fitted to the top of the white base,
water will flow into the water reservoir below, filling it to the brim with water,
make sure not to spill by lifting and tilting it!
In use:
Turn control knob (4) to set the vapor release rate depending on requirement,
including dryness or size of room.
When the tank is short of water, the indicator will turn Red once again, and vapor
release will stop. Turn off and un-plug the unit from the wall socket.
How to re-fill with water:
1. Remove the white mist cover from the top of the blue water tank. Never remove
or fill the water tank with the mist cover attached.
2. Carefully remove the blue water tank from its base and turn the tank
upside-down.
Note: During this process the water reservoir (top of the base unit) will be full of
water, lift off the tank into a towel to catch drips if necessary.
3. Continue as step 3 (See “First time use”)