6 Inch Stand Fan Chrome FD-40M
Read all instructions before using this appliance. Carefully retain these instructions for future reference. Thank you for choosing a Challenge fan. It is a remarkably versatile product which offers a choice of air-circulation for summer comfort. This fan has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, this appliance will give you years of useful service. Please read these instructions carefully.
Description of parts 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 12 11 10 Front Guard Locking screw Fan Blade Rear Guard Front Guard Nut (x1) Telescopic Stand Pivot Adjustment Screw Tilt Adjustment Screw Motor Housing On/Off/Speed Control Oscillating Control Motor Spindle Fan Blade Retaining Screw (x1) Guard Retaining Clips Stand Base Weight Clamping Washer L - Shaped Screw 9 7 8 6 3 1 4 5 2 6 15 16 17 18 Assemble Your Metal Stand Fan Steps: 1.
2. Next attach the motor housing (9) to the top of the telescopic stand (6).First remove all the screws, etc. (7, 8, 19 & 20) from the motor housing bracket. 9 19 8 8 19 7 7 20 6 3. Place the Motor Housing on the top of the stand and thread the Large Pivot Bolt (20) through the bracket and screw in the Small Retaining Screw (8) and tighten (but do not over tighten). 4. Fit the Large Pivot Knob (7) onto the end of the Bolt (20) and the Small Adjusting Knob (19).
CLEANING AND MAINTENANCE Your fan reauires little maintenance and contains no user serviceable parts. Do not attempt to dismantle the Fan Motor body yourself. The fan is permanently lubricated and will not require additional lubrication. Important: Do not allow water to run into the interior of the fan , as this cause an electric shock .DRY THE FAN THOROUGHLY with a dry cloth, checking that the fan is completely dry before operating the fan.
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
CONNECTION TO POWER Before Switching on make sure that the voltage of your electricity supply is the same as that indicated on the rating plate.
Technical Specifications Description Symbol Value Unit Model no. -- FD-40M -- Voltage -- 220-240 VAC Insulation class -- Class I -- Maximum fan flow rate F 43,02 m /min P 35,70 W SV 1,21 (m /min)/W Fan power input Service value 3 3 Off mode power consumption Poff 0 W Fan sound power level LWA 65,30 dB(A) c 2,95 meters/sec Maximum air velocity Measurement standard for service value IEC 60879:1986 (corr.
