Assembly Instructions

13
Customer Helpline 01904 727508
www.coreservice.co.uk
The blade reel is adjusted for proper clearance from the cutting bar at the factory. However, after
extended periods of mowing or as part of annual maintenance, it is recommended that the blade
clearance be readjusted .
• If blade clearance is too wide, the cutting pattern will be rough and uneven.
• If blade clearance is too narrow, the machine will be noisy and difcult to push while operating.
To adjust blade clearance, proceed as follows:
1. Turn mower upside down.
2. Insert a piece of paper(thickness around 0.12mm) between cutter bar and reel blades, and
slowly turn wheel by hand.
3. All blades should slice the paper evenly, along the entire length of the cutter bar while the reel
turns smoothly.
4. If mower has an intermittent cut, adjustment should be made to the appropriate side of blades
to attain proper cutting action. We’ve taking sharpening the cutting blade out due to health and
safety issues.
Maintenance and Storage
Blade clearance adjustment
Storage and transportation
CAUTION!
- Do not place hands in the mower near blades. If grass cuttings are compacted in the blade area,
remove using a wood or plastic cleaning tool appropriate for the cleaning of the blades.
1. Clean the exterior of the machine thoroughly using a soft brush and cloth before storing. Do not
use water, solvents or polishes.
2. Turn the mower on its side to clean the blade area.
3. Store the mower in a dry place. Do not place other objects on top of the mower during storage.