Assembly Instructions

14
Customer Helpline 01904 727508
www.coreservice.co.uk
Troubleshooting
WARNING!
- Only perform the steps described within these instructions! All further inspection, maintenance
and repair work must be performed by an authorised service centre or a similarly qualied
specialist if you cannot solve the problem yourself!
Suspected malfunctions, disturbances or damages are often due to causes that the user can x
themself. Therefore check the product using this section. In most cases the problem can be solved
quickly.
Troubleshooting
Problem Possible Cause Solution
Unsatisfying cutting
result
Blade clearance is too wide Adjust the blade clearance ,refer
to maintenance section
Machine is too
noisy and difcutl to
operate
Blade clearance is too narrow Adjust the blade clearance ,refer
to maintenance section