Parts List

6
Customer Helpline 01904 727508
www.coreservice.co.uk
1. Always ensure the safety guard supplied is tted before using the
hedge trimmer.
2. Never attempt to use an incomplete machine or one tted with an
unauthorized modication
3. Check cutting blades regularly for damage, and if damaged repair
immediately
4. Keep cable away from the cutting area and check the cable for damage
before starting work
5. Do not start the hedge trimmer with the blade sheath tted
6. Take care not to overload the hedge trimmer which it is not intended,
i.e. you are allowed to use the hedge trimmer only to cut hedges shrubs
and perennials
7. Always be sure of your footing when using steps and when using your
hedge trimmer
8. Never run when using your hedge trimmer.
9. Heavy duty gloves should always be worn when using the hedge
trimmer
10. Be careful during adjustment of placing your ngers between moving
blades and xed parts of the machine
11. During transportation and storage of the hedge trimmer, keep the
blades covered at all times with blade sheath.
12. The use of a residual current device (R.C.D) with a tripping current of
no more than 30mA is recommended.
13. Do not try grasp or remove hedge clippings when the hedge trimmer is
running. Only remover hedge clippings when the appliance is switched
off and disconnected from the mains supply.
14. Carry the hedge trimmer at the handle while the cutter blade is not
running. Always ensure guard supplied is tted when transporting or
storing the hedge trimmer. Careful operation reduces the injury by the
cuter blade.
15. Keep cable away from the cutting area. Be aware that during operation
the cable may be covered in hedge clipping and could be cut
inadvertently.
16. If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a
hazard.
Safety Information
Electrical safety
Important - Please read these instructions fully before operation or maintainance