Parts List

13
Customer Helpline 01904 727508
www.coreservice.co.uk
Important charging notes
Longest life and best performance can be obtained if the battery pack is charged when the air
temperature is between 18-24
o
C. Do not charge the battery pack in a very low or very high air
temperature. This is important and will prevent serious damage to the battery pack.
1. When using your tool continuously, the batteries in your battery pack will become hot. You
should let a hot battery pack cool down for approximately 30 minutes before attempting to
recharge.
2. The charger and battery pack may become warm to touch while charging. This is a normal
condition, and does not indicate a problem.
3. Use the charger in normal room temperatures whenever possible. To prevent overheating, do
not cover the charger and do not charge battery packs in direct sunlight or near heat sources.
4. If the battery pack does not charge properly;
(1).Check the main socket by plugging in a lamp or other appliance.
(2). Move the charger and battery pack to a location where the surrounding air temperature is
approximately 18-24
o
C.
(3). If charging problems persist, take or send the tool, battery pack and charger to your local
service center.
5. The battery pack should be recharged when it fails to produce sufcient power on jobs which
were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the
charging procedure. You may also charge a partially used pack whenever you desire with no
adverse effect on the battery pack.
6. Under certain conditions, with the charger plugged in to the power supply, the exposed
charging contacts inside the charger can be shorted by foreign material. Foreign materials of a
conductive nature such as, but no limited to, steel wool, aluminum foil, or any buildup of metallic
particles should be kept away from charger cavities. Always unplug the charger from the power
supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.
7. Do not immerse charger in water or any other liquid.
WARING!
Don’t allow any liquid to get inside charger. Electric shock may result. To facilitate the cooling of
the battery pack after use, avoid placing the charger or battery pack in a warm environment such
as in a metal shed, or an un-insulated trailer.
CAUTION!
Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack
breaks or cracks, return to a service center for recycling; do not put it into further use.
Assembly
Charging procedure