User Manual

11

PARTS LIST
(See Fig. A, continued)
9. Press Knob for Guide Bar Tension
10. End Cover
11. Oil Level Window
12. Rear Guard
13. Cable Strain Relief
14. Power Cord with Plug
15. Oil Tank Cap
16. Lock-off Button
17. On/Off Switch
18. Rear Handle
19. Air Vents
20. Drive Sprocket
21. Spike Bumper
22. Oiling Port
23. Bolt
24. Tension Pin
Remark: Above are all assembled in the standard delivery.


INTENDED USE



This chain saw is designated with a rated input of 1800 Watts. The product is intended for cutting
logs with a thickness of max. 326mm. It must not be used for cutting other materials, such as
plastics, stone, metal or wood that contains foreign objects.
The product may only be used with the guide bar/saw chain combination stated in these
instructions. It is not permitted to use other types or sizes.
Vertical and horizontal cuts can be performed with this product. Longitudinal sections can only
be cut by professionals.
This product should not be used outside of domestic premises e.g. for cutting firewood in forested
areas. The product should not be used on masonry and material that are harmful to health.
This product is intended for private domestic use only, not for any commercial trade use. It must
not be used for any purposes other than those described.