User Manual

20

OPERATION
Kickback (continued)
Pinching of the saw chain (4) along the bottom of the guide bar (5) may pull the product
forward away from the operator (Fig. 26)
Pinching of the saw chain (4) along the top of the guide bar (5) may push the guide bar
rapidly back toward the operator (Fig.27).
Any of these reactions may cause a loss of control over the product, which could result in
serious personal injury or even death.
With a basic understanding of “kickback”, the element of surprise can be reduced or
eliminated. Sudden surprise contributes to the majority of accidents.
Keep a good firm grip on the product with both hands, your right hand on the rear handle (18)
and your left hand on the front handle (1), when the motor is running. Maintain a firm grip
with your thumbs and fingers encircling the handles. A firm grip will help you reduce
“kickback” and maintain control of the product.
You should read all the safety warnings and user instructions carefully before attempting to
operate this product.
To Avoid Kickback:
Saw with the guide bar at a flat angle.
Never work with a loose, widely stretched or heavily worn chain.