Installation Manual

10
JUNCTION BOX WIRING
ART NOT
FINAL
CALLOUTS
TO BE
APPLIED
WHEN
COMPLETE
TONY TO PROVIDE A PICTURE
WITH INFORMATION ON WHERE
WIRING WILL COME IN AND WHAT
EVERYTHING IS
Locate the black 4-Wire cable and the black
2-Wire cable with connectors fastened to one
end.
Feed the loose wire ends of the cable down
the conduit to the door control.
Plug the 5-pin connectors and 2-pin into the
inverter board as shown.
Wire mains input power here
Connect the earth ground wire to the green
wire using the wire nut provided.
Connect Line and Neutral wires to the
terminal block as marked (L, N)