Installation Manual

ManualsBrandsChamberlain Group ManualsElectronicsPart 15 Spread Spectrum Transmitter Commercial Door Operator Radio

PROGRAMMING

myQ

SMART FACILITY ACCESS

One Platform to manage access for Unlimited Facilities, Users and Vehicles

myQ

Smart Facility Access allows you to control all your access points in the facility from

the myQ

website application from anywhere. Monitor & control your vehicular access

doors, gated entry locations & even dock positions from a universal platform. myQ

technology uses a 900Mhz signal or a Wi-Fi connection to communicate securly from your

connected devices to myQ

enabled accessories or directly to a Wi-Fi network.

SETUP A myQ

SMART FACILITY ACCESS ACCOUNT

NOTE: If you have an existing myQ

account, your myQ

Business

™

account will have the

same password.

1. If you do not have a myQ

Business

™

account, call LiftMaster Customer Care at

800.323.2276 to activate a myQ

Business

™

account.

2. You will get a welcome email from LiftMaster. Accept the invitation and register or

3. Set up the Facility and add users & groups to provide access to the Facility (refer to

the available Help in myQ

Business

™

4. Follow onscreen prompts to get your Variable Speed Door Operator and additional

devices connected.

PROVISIONING WI-FI

Follow the below instructions to pair the operator:

1. Press the “STOP/ENTER” and “DOWN” buttons at the same time for 3 seconds to

enter the operator menu.

1. Scroll down to “SYSTEM SETTINGS” with the “UP” and “DOWN” buttons and press

“ENTER”. You will be prompted to enter the password for the operator.

2. Enter #### as the password.

1. Scroll down to “CONNECTIVITY” and press “ENTER”

1. Press “ENTER” again to select “CONNECTIVITY LEARN”.

1. Scroll down to “LEARN WIFI” and press “ENTER”. The operator will now be in Learn

Mode.

Menu screen

STOP

ENTER

DOWN