User's Manual

3
Mount PIR Motion Sensor
horizontally on solid surface a few
feet off the ground and within 1/2
mile of Base Station (rotate sensor
to access screw holes). Unit should
be able to swivel as needed. Attach sun/rain shield.
NOTE: Keep PIR Motion Sensor antenna away from
metal objects. Do not mount PIR Motion Sensor in
direct sunlight, near moving tree branches, or in the
path of a sprinkler system.
PIR Motion Sensor Installation
3' - 5'
10' - 20'
Vehicle Alert Installation: For cars, the best
mounting position is about 4' high, between 10-20'
back, and angled to see the back of car after passing
the sensor.
Step 7
Step 5
Plug in Base Station. Adhere
rubber pads to the bottom of
the base. 4 AA batteries (not
provided) are optional in case
of a power failure.
OPTIONAL
A
B
Programming PIR Motion
Sensor to Base Station
B Within 5 seconds, wave hand in front of PIR Motion
Sensor. Test light will illuminate and Base Station
will buzz.
A
B
A Ensure Base
Station and PIR
Motion Sensor are
in close proximity
to each other.
Press and release
learn button on
Base Station.
Buzzer will sound.
Step 6
Learn Button
AC Adapter Input