User Manual

MOUNTING TEMPLATE

(Use this template as a guide for mounting screw placement)

NOTE:

The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Changes or modifications not

expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

If you have installation or operation questions, please see above, or check out the expanded FAQ at the manufacturer’s

web page at www.reporterwireless.com. You can receive free technical assistance or warranty service, by email at

techsupp@nwlink.com or call 888.679.7994 x 290 Tuesday-Friday 8-5 PST

Warranty:

This product is warranted to be free of defects for the period of One Year from the date of purchase. The warranty covers

parts, labor, and return shipping to you, but not all accessories. IEI will repair or replace any defective product at our discretion. Warranty

does not cover misuse or damage other than due to normal operating conditions. If you need to send the system to IEI for repair, contact IEI

for a Return Authorization number via email: techsupp@nwlink.com. Packages without a Return Authorization number will be

rejected.

PAGE 1
MOUNTING TEMPLATE (Use this template as a guide for mounting screw placement) NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If you have installation or operation questions, please see above, or check out the expanded FAQ at the manufacturer’s web page at www.reporterwireless.
PAGE 2
Model OMG2 102406 Setting Up the MiniGAP2 Patents pending Thank you for purchasing the Oracle MiniGAP2. This product has been designed and manufactured in the USA, utilizing the highest quality standards available. MiniGAP2 The Oracle™ MiniGAP2 unit can be your primary door and gate access system or used as an accessory to a Gate Access Panel (GAP). Installation Make sure that the CALL button is in easy reach of a visitor.
PAGE 3
Multi-GAP Mode Clearing the Mini-GAP2’s Memory To put the unit in Multi-GAP (Gate Access Panel) Mode, place dipswitch #1 DOWN (towards the circuit board) placing the unit into “Passive” mode. This unit will now act as an accessory to an “Active” GAP or “Active” MiniGAP2 module within an Oracle System Network, customarily used at a side or back entrance. Any accessories that had been previously activated to a “Passive” MiniGAP2 will have to be re-activated to the “Active” GAP or MiniGAP2 unit.