Instructions / Assembly

REPLACEMENT PARTS

Part No. Description Qty

183C158-14 Header rail extension 1

41A5807-1 8' Chain/Cable Assembly 1

41A3021 Rope 1

4A1008 Master Link Kit 1

ADDING AN ADDITIONAL HANGING

BRACKET:

Cut the enclosed hanging bracket (cross brace) to fit across the

installed hanging brackets. Fasten the cross brace to the top and

bottom hole of the hanging brackets (Figure 5 and Figure 6) using

5/16" -18x7/8" hex bolts, 5/16 lock washers and 5/16" -18 nuts.

To avoid possible SERIOUS INJURY from a falling garage door opener,

fasten it SECURELY to structural supports of the garage. Concrete

anchors MUST be used if installing any brackets into masonry.

WARNING

CAUTION

WARNING

Hex Bolt

5/16"-18x7/8"

Nut 5/16"-18

Lock Washer 5/16"

Hanging Bracket (Cross Brace) Not shown actual size

Lock Washer 5/16"

Nut 5/16"-18

Lock Washer 5/16"

Nut 5/16"-18

Bolt 5/16"-18x7/8"

Hanging Bracket

(Cross Brace)

Figure 5

HARDWARE SHOWN ACTUAL SIZE

Lock Washer 5/16"

Nut 5/16"-18

Lock Washer 5/16"

Nut 5/16"-18

Bolt 5/16"-18x7/8"

Hanging Bracket

(Cross Brace)

Figure 6