Installation Guide
Table Of Contents
- ENGLISH
- BILT Intelligent Instructions
- Installation Manual
- Contents
- Safety Symbol and Signal Word Review
- Preparation
- Assembly
- Installation
- STEP 1 Determine the Header Bracket Location
- STEP 2 Install the Header Bracket
- STEP 3 Attach the Rail to the Header Bracket
- STEP 4 Position the Garage Door Opener
- STEP 5 Hang the Garage Door Opener
- STEP 6 Install the Light Bulbs
- STEP 7 Attach the Emergency Release Rope and Handle
- STEP 8 Install the Door Bracket
- STEP 9 Connect the Door Arm to the Trolley
- STEP 10 Install the Door Control
- STEP 11 Wire the Door Control to the Garage Door Opener
- STEP 12 Attach the Warning Labels
- STEP 13 Install the Protector System®
- STEP 14 Wire the Safety Reversing Sensors
- STEP 15 Connect Power
- STEP 16 Align the Safety Reversing Sensors
- Adjustments
- Battery Backup
- myQ® App Control
- Operation
- Maintenance
- Troubleshooting
- Warranty
- Contact Information
- Automatic Garage Door Opener Safety & Maintenance Guide
- Repair Parts
50
Repair Parts
Garage Door Opener Parts - Model C2405
1
2
5
4
10
14
6
7
12
8
9
11
4
5
3
13
Description Part Number
1 Chain spreader 041A5615
2 Gear and sprocket 041C4220A
3 End panel with light socket 041D0207
4 Light socket 041C0279
5 Light lens 041-0144
6 Capacitor 030B0532-1
7 Capacitor bracket K012A0373
8 Travel module 041D7742-7
9 Cover 041-0229-000
10 Logic board 050ACTWF
11 End panel for receiver logic board with light socket 041D8214
12 Motor with travel module 041D7440
13 Line cord 041B4245-1
14 Terminal block 041A3150
Not shown
Wire harness 041A7945