Replacement Part List
Table Of Contents
- ENGLISH
- Contents
- Safety Symbol and Signal Word Review
- Preparation
- Assembly
- Installation
- STEP 1 Determine the Header Bracket Location
- STEP 2 Install the Header Bracket
- STEP 3 Attach the Rail to the Header Bracket
- STEP 4 Position the Garage Door Opener
- STEP 5 Hang the Garage Door Opener
- STEP 6 Attach the Emergency Release Rope and Handle
- STEP 7 Install the Door Bracket
- STEP 8 Connect the Door Arm to the Trolley
- STEP 9 Install the Door Control
- STEP 10 Wire the Door Control to the Garage Door Opener
- STEP 11 Attach the Warning Labels
- STEP 12 Install the Protector System®
- STEP 13 Wire the Safety Reversing Sensors
- STEP 14 Connect Power
- STEP 15 Align the Safety Reversing Sensors
- Adjustments
- Battery Backup
- myQ® App Control
- Camera
- Operation
- Maintenance
- Troubleshooting
- Warranty
- Automatic Garage Door Opener Safety & Maintenance Guide
- Repair Parts
Threaded
Shaft with
Spring
Trolley Nut
ASSEMBLY
Bolt
1/4”-20x1-3/4”
Lock Washer 3/8”
Bolt
Master Link
Hex Screw #8x3/8" (3)
(packed with the
sprocket cover)
Nut 3/8”
Lock Nut
1/4"-20
INSTALLATION
Lag Screw 5/16”-9x1-5/8” (4)
Clevis Pin 5/16”x1-1/2”
Self-Threading Screw
1/4"-14x5/8" (2)
Hex Bolt 5/16”-18x7/8” (4)
Clevis Pin 5/16”x1” Clevis Pin 5/16”x1-1/4”
Hex Screw 10-24 (2)
Nut
5/16”-18 (4)
Lock Washer
5/16”-18 (4)
Wing Nut (2)
Ring
Fastener(3)
DOOR CONTROL
Drywall Anchors (2)
Screw 6-32x1" (2)
Screw 6ABx1" (2)
Insulated Staples
(Not Shown)
Preparation
Hardware
8