Instructions / Assembly

35
Operation
Door Control
SYNCHRONIZE THE DOOR CONTROL: To synchronize the door control to the garage door opener,
press the push bar until the garage door opener activates (it maytake up to 3 presses).Test the door
control by pressing the push bar; each pressof the push bar will activate the garage door opener.
Push Bar
LIGHT Button
Motion Sensor
Navigation Buttons
Screen
PUSH BAR: Pressthe push bar to open or close the door.
LIGHT BUTTON: Pressthe LIGHTbutton to turn the garage door opener lightson or off.When the
lights are turned on they will stay on until the LIGHTbutton ispressed again, or until the garage door
opener is activated. Once the garage door opener is activated the lights will turn off after the specified
period of time (the factory default is 4-1/2 minutes). The LIGHTbutton will not control the lightswhen the
door isin motion. The Light Feature will turn on the light on the garage door opener when someone
enters through the open garage door and the safety reversing sensor infrared beam is obstructed.
MOTION SENSOR: The motion sensor automatically turns on the garage door opener lightswhen
motion is detected. The lightscome on for the set period of time, and then shut off.If using the garage
door opener light as a work light disable the motion sensor, otherwise the lightsmay turn off
automatically ifyou are beyond the range of the motion sensor.
NAVIGATION AND SCREEN: The screen displaysthe time, temperature, and current battery charge (if
applicable) until the menu button is pressed, and then itwill display the menu options.If there is a
problem with the garage doors opener the screen will display an error code (diagnostic code, see page
39). The features on the door control can be programmed through a series of menus on the screen.
Use the navigation buttons to scroll through the menus and make selections.
MENU OPTIONS
CLOCK SETUP: Set the time; choose 12 or 24 hour clockand show/hide clock.
TEMPERATURE: Display the temperature in Fahrenheit or Celsius and show/hide the temperature.
LANGUAGE: SelectEnglish, Spanish or French.
CONTRAST ADJUST: Adjustthe screen contrast.
LIGHT SETTINGS:
To change the amount of time the lightsstay on:
1. SelectLIGHTSETTINGS from the menu.
2. SelectLIGHTTIME.
3. Selectthe time interval.
To turn the Light Feature on or off (Factory default is On):
1. SelectLIGHTSETTINGS from the menu.
2. SelectAUTOMATIC LIGHTS.
3. SelectENTRY SENSOR.
To turn the motion sensor on or off:
1. SelectLIGHTSETTINGS from the menu.
2. SelectAUTOMATIC LIGHTS.
3. SelectMOTION SENSOR.
LOCK: Preventsthe garage door opener from being activated by remote controls while still allowing
activation from the door control and keylessentry.
To turn the LOCK feature ON or OFF:
1. SelectLOCK from the menu. When the LOCK feature ison, a message displays on the
screen.