SDS

Skin Contact
Immediate medical attention is required. Wash off immediately with soap and plenty
of water removing all contaminated clothes and shoes.
Inhalation
Move to fresh air. Call a physician or Poison Control Center immediately. If not
breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion
Immediate medical attention is required. Call a physician or Poison Control Center
immediately. Do NOT induce vomiting. Drink plenty of water. Never give anything by
mouth to an unconscious person. Remove from exposure, lie down.
Notes to Physician
Treat symptomatically.
Protection of First-aiders
Use personal protective equipment. Avoid contact with skin, eyes and clothing.
Flammable Properties
Not flammable.
Flash Point
Not determined.
Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Uniform Fire Code
Corrosive: Acid-Liquid
Hazardous Combustion Products
Hazardous metal fumes and oxides.
Explosion Data Sensitivity to Mechanical Impact
No.
Sensitivity to Static Discharge
No.
Specific Hazards Arising from the Chemical
The product causes burns of eyes, skin and mucous
membranes. Thermal decomposition can lead to release of
irritating gases and vapors. In the event of fire and/or explosion
do not breathe fumes.
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
NFPA Health Hazard 3 Flammability 0 Stability 2 Physical and Chemical Hazards
Personal Precautions Use personal protective equipment. Do not touch damaged containers or spilled
material unless wearing appropriate protective clothing. Do not get in eyes, on skin,
or on clothing.
Environmental Precautions Refer to protective measures listed in Sections 7 and 8.
Methods for Containment Prevent further leakage or spillage if safe to do so.
Methods for Cleaning Up In case of rupture: Use personal protective equipment. Dam up. Soak up with inert
absorbent material. Take up mechanically and collect in suitable container for
disposal. Clean contaminated surface thoroughly.
Other Information Refer to protective measures listed in Sections 7 and 8.
5. FIRE-FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES