Instructions / Assembly

34
Operation
Door Control
SYNCHRONIZE THE DOOR CONTROL: To synchronize the door control to the garage door opener,
press the push bar until the garage door opener activates (it may take up to 3 presses).Test the door
control by pressing the push bar; each press of the push bar will activate the garage door opener.
Push Bar
LIGHT Button
Motion Sensor
Navigation Buttons
Screen
PUSH BAR: Press the push bar to open or close the door.
LIGHT BUTTON: Pressthe LIGHTbutton to turn the garage door opener lightson or off. When the lights
are turned on they will stay on until the LIGHT button is pressed again, or until the garage door opener is
activated. Once the garage door opener is activated the lightswill turn off after the specified period of
time (the factory default is 4-1/2 minutes). The LIGHTbutton will not control the lights when the door is in
motion. The Light Feature will turn on the light on the garage door opener when someone enters
through the open garage door and the safetyreversing sensor infrared beam is obstructed.
MOTION SENSOR: The motion sensor automatically turns on the garage door opener lightswhen
motion is detected. The lights come on for the setperiod of time, and then shut off.If using the garage
door opener light as a work light disable the motion sensor, otherwise the lightsmay turn offautomatically
if you are beyond the range of the motion sensor.
NAVIGATION AND SCREEN: The screen displaysthe time, temperature, and current battery charge (if
applicable) until the menu button is pressed, and then it will display the menu options.If there is a
problem with the garage doors opener the screen will display an error code (diagnostic code, see page
38).The features on the door control can be programmed through a series of menus on the screen. Use
the navigation buttons to scroll through the menus and make selections.
MENU OPTIONS
CLOCK SETUP: Set the time; choose 12 or 24 hour clock and show/hide clock.
TEMPERATURE: Display the temperature in Fahrenheit or Celsius and show/hide the temperature.
LANGUAGE: SelectEnglish,Spanish or French.
CONTRAST ADJUST: Adjust the screen contrast.
LIGHT SETTINGS:
To change the amount of time the lightsstayon:
1. SelectLIGHTSETTINGS from the menu.
2. SelectLIGHTTIME.
3. Selectthe time interval.
To turn the Light Feature on or off(Factory default is On):
1. SelectLIGHTSETTINGS from the menu.
2. SelectAUTOMATIC LIGHTS.
3. SelectENTRY SENSOR.
To turn the motion sensor on or off:
1. SelectLIGHTSETTINGS from the menu.
2. SelectAUTOMATIC LIGHTS.
3. SelectMOTION SENSOR.
LOCK: Prevents the garage door opener from being activated by remote controls while still allowing
activation from the door control and keyless entry.
To turn the LOCK feature ON or OFF:
1. SelectLOCK from the menu. When the LOCK feature is on, a message displayson the screen.