Operating Guide

UNIVERSAL REMOTE CONTROL
The remote control can be programmed to
activate up to two products, such as a
garage door opener, gate operator, or
commercial door operator. Each button on
the remote control works independently of
the other and must be programmed separately. The images
throughout this manual are for reference only and your
product may look different.
MODEL KLIK3U
To prevent possible SERIOUS INJURY or DEATH from a
moving gate or door:
• ALWAYS keep remote controls out of reach of
children. NEVER permit children to operate, or play
with remote control transmitters.
• Activate gate or door ONLY when it can be seen
clearly, is properly adjusted and there are no
obstructions to door travel.
• ALWAYS keep gate or door in sight until completely
closed. NEVER permit anyone to cross path of moving
gate or door.
Read instructions thoroughly BEFORE
beginning. If using the Universal Remote Control
with residential door openers, the remote control
must be used only with door openers
manufactured after 1993 that utilize photoelectric sensors.
The photoelectric sensors are always located on or near the
bottom of the door track.
STOP