Application Guide

Table Of Contents

Having Trouble Connecting the Smart Garage

Hub to Your Network?

If you are unable to connect the Smart Garage Hub to your network, erase the Wi-Fi

settings and try again. If you

are still unable to connect, reset the Smart Garage Hub to factory default and try again.

Erase Wi-Fi settings

Erasing the Wi-Fi settings allows you to reset the Wi-Fi settings on the Smart Garage Hub.

1. The Green LED on the Smart Garage Hub MUST be on or blinking to erase the Wi-Fi settings.

2. Press and hold the settings button (gear) on the Smart Garage Hub until the blue LED blinks. The Wi-Fi is ready

to be setup.

Factory Default

Setting the Smart Garage Hub back to factory default erases the Wi-Fi settings, door sensors, removes the device

from the MyQ account, and erases any remotes or keyless entries that have been programmed to it.

1. Press and hold the settings button (gear) on the Smart Garage Hub until the blue LED blinks then release.

2. While the blue LED on the Smart Garage Hub is blinking, press and hold the settings button (gear) again until

the blue LED pauses, then blinks or beeps. The Smart Garage Hub is set to factory default.

NOTE: If lights on hub are blinking blue and green, you will need to unplug the router to erase the Wi-Fi settings or

set to factory default.

Smart Garage Hub

Gear Button

and the MyQ

logo are

registered trademarks of The Chamberlain Group, Inc. Patents and patents pending. Apple is a trademark of Apple Inc., registered

in the U.S. and other countries. App Store is a service mark of Apple, Inc. Android and Google are trademarks of Google Inc.,

registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.

Wi-Fi

is a registered trademark of Wi-Fi Alliance. All other trademarks are the property of their respective owners.

114A5136

PAGE 1
! Having Trouble Connecting the Smart GarageTM Hub to Your Network? If you are unable to connect the Smart Garage Hub to your network, erase the Wi-Fi® settings and try again. If you are still unable to connect, reset the Smart Garage Hub to factory default and try again. Gear Button Erase Wi-Fi settings Erasing the Wi-Fi settings allows you to reset the Wi-Fi settings on the Smart Garage Hub. 1. The Green LED on the Smart Garage Hub MUST be on or blinking to erase the Wi-Fi settings. 2.
PAGE 2
! Des problèmes pour connecter le concentrateur Smart GarageTM à votre réseau? Si vous n’arrivez pas à connecter le concentrateur Smart Garage à votre réseau, effacer les paramètres Wi-Fi® et essayer de nouveau. S’il est toujours impossible de vous connecter, réinitialiser le concentrateur Smart Garage au paramètre par défaut et essayer de nouveau.
PAGE 3
! ¿Tiene problemas para conectar el Distribuidor de Smart GarageTM a su red? Si el Distribuidor de Smart Garage (Garaje Inteligente) no puede conectarse a su red, borre las conﬁguraciones Wi-Fi® y vuelva a intentarlo. Si aún no puede conectarse, restablezca el Distribuidor de Smart Garage a la conﬁguración predeterminada de fábrica y vuelva a intentarlo.