Installation Manual

How to connect the MyQ Smart Garage Hub to a

Wi-Fi network

Content

If at any point during the setup you experience an error it is recommend to follow the below

steps to reset the MyQ Smart Garage Hub and return the hub back to factory default.

Make sure the Wi-Fi signal in the garage is strong and your mobile device is connected to

your 2.4 GHz Wi-Fi network.

Connect with Apple® iOS Mobile Device

1. Plug in the Smart Garage Hub. The blue LED on the Smart Garage Hub will blink, the

Smart Garage Hub is now ready to be connected to your network.

2. On your mobile device go to Settings, tap Wi-Fi, then tap the network with the ”MyQ”

prefi x and tap Connect. Once connected, launch the mobile device’s web browser and

go to setup.myqdevice.com. (If your device cannot connect to setup.myqdevice.com

please check the troubleshooting steps at Chamberlain.com.)

3. Tap Start.

4. Tap your network from the available Wi-Fi networks list.

5. Enter the network password for the selected Wi-Fi network.

6. Tap Next. The Smart Garage Hub will connect to the selected Wi-Fi network; this

may take a few minutes.

7. Once the Smart Garage Hub is connected to your network a Congratulations window

will open and the LED on the Smart Garage Hub will display solid Green. Tap Next to

continue.

8. Download the MyQ® App from the App Store

9. Launch the MyQ App, login, and tap the menu icon. From the side menu tap Manage

Places > tap + > tap your MyQ Place > tap Garage Door Opener.

NOTE: Do not operate the garage door opener until installation has been completed.

Connect with Android

Mobile Device

1. Download the MyQ app from the Google Play store.

2. Create or Log into your MyQ Account.

3. Plug in the Smart Garage Hub and wait for a blinking blue LED.

4. Tap Add a Device or tap the (gear) icon.

5. Search for the device with the “MyQ” prefix under Discovered Devices.

6. When prompted select your home network.

7. When prompted enter your home network password.

8. Verify the LED on the Smart Garage Hub is now solid Green.

9. In the MyQ App go to the Menu button > Manages Places > Select your Place > Add a

Device > Garage Door Opener.

NOTE: Do not operate the garage door opener until installation has been completed.

Alternate Connection Method for Android

1. Download the MyQ App on Google Play.

2. Plug in the Smart Garage Hub. The blue LED on the Smart Garage Hub will blink, the

Smart Garage Hub is now ready to be connected to your network.

PAGE 1
How to connect the MyQ Smart Garage Hub to a Wi-Fi network If at any point during the setup you experience an error it is recommend to follow the below steps to reset the MyQ Smart Garage Hub and return the hub back to factory default. Make sure the Wi-Fi signal in the garage is strong and your mobile device is connected to your 2.4 GHz Wi-Fi network. Connect with Apple® iOS Mobile Device 1. Plug in the Smart Garage Hub. The blue LED on the Smart Garage Hub will blink, the 2. 3. 4. 5. 6. 7. Content 8.
PAGE 2
3. On your mobile device go to Settings, tap Wi-Fi, then tap the network with the ”MyQ” prefi x and tap Connect. Once connected, launch the mobile device’s web browser and go to setup.myqdevice.com. (If your device cannot connect to setup.myqdevice.com please check the troubleshooting steps at Chamberlain.com.) 4. Tap Start. 5. Tap your network from the available Wi-Fi networks list. 6. Enter the network password for the selected Wi-Fi network. 7. Tap Next.