Operation Manual
Table Of Contents
- Owner's Manual
- CONTENTS
- Preparation
- Assembly
- Installation
- STEP 1 Determine the header bracket location
- STEP 2 Install the header bracket
- STEP 3 Attach the rail to the header bracket
- STEP 4 Position the garage door opener
- STEP 5 Hang the garage door opener
- STEP 6 Install the light bulbs
- STEP 7 Attach the emergency release rope and handle
- STEP 8 Install the door bracket
- STEP 9 Connect the door arm to the trolley
- STEP 10 Install the door control
- STEP 11 Wire the door control to the garage door opener
- STEP 12 Attach the warning labels
- STEP 13 Install the Protector System®
- STEP 14 Wire the Safety Reversing Sensors
- STEP 15 Connect power
- STEP 16 Ensure the safety reversing sensors are aligned
- STEP 17 Ensure the door control is wired correctly
- Adjustments
- Operation
- Maintenance
- Troubleshooting
- Accessories
- Warranty
- Contact Information
- Repair Parts
- Spanish
43
14
11
10
13
7
6
9
2
12
8
4
4
3
5
5
1
Repair Parts
Garage Door Opener Parts
Description Part Number
1 Chain Spreader 41A5615
2 Gear and Sprocket 41C4220A
3 End Panel with Light Socket 41A7760
4 Light Socket 41C279
5 Light Lens
Model HD420EV
Model PD612EV
41D7572
41D7570
6 Capacitor 30B532
7 Capacitor Bracket 12A373
8 Travel Module 41D7742-7
9 Cover
Model HD420EV
Model PD612EV
41A7620-7
41A7620-10
10 Receiver Logic Board 45ACT
11 End Panel for Receiver Logic Board
with Light Socket
41D7638
12 Motor with Travel Module 41D7440
13 Line Cord 41B4245
14 Terminal Block 41A3150
Not Shown
Wire Harness Kit 41A7945
© 2013, The Chamberlain Group, Inc.
114A4305D All Rights Reserved