Installation Instructions

Maintenance

MAINTENANCE SCHEDULE

Once a Month

• Manually operate door. If it is unbalanced or binding, call a trained door

systems technician.

• Check to be sure door opens and closes fully. Adjust limits and/or force if

necessary (see Adjustment Steps 1 and 2).

• Repeat the safety reverse test. Make any necessary adjustments (see

Adjustment Step 3).

Once a Year

• Oil door rollers, bearings and hinges. The garage door opener does not

require additional lubrication. Do not grease the door tracks.

Care of Your Garage Door Opener

To prevent possible SERIOUS

INJURY or DEATH:

• NEVER allow small children

near batteries.

• If battery is swallowed,

immediately notify doctor.

To reduce risk of ﬁre, explosion or

chemical burn:

• Replace ONLY with 3V CR2032

coin batteries.

• DO NOT recharge,

disassemble, heat above 212°

F (100° C) or incinerate.

THE REMOTE CONTROL BATTERY

The 3V CR2032 Lithium battery should produce power for up to 3 years. If

the battery is low, the remote control's LED will not ﬂash when the button is

pressed.

To replace battery, pry open the case ﬁrst in the middle (1), then at each side

(2 and 3) with the visor clip. Replace the batteries with only 3V CR2032 coin

cell batteries. Insert battery positive side up. Dispose of old batteries properly.

3V CR2032