Installation Instructions

7
Safety reversing
sensor and bracket
Safety reversing
sensor and bracket
Door control wire
Door control
Remote light
Safety reversing
sensor wire
S
afety reversing
s
ensor wire
Door lock wire
Cable tension
monitor and wire
Overview of Installation
Preparation (continued)
ADDITIONAL ITEMS YOU MAY NEED FOR THE INSTALLATION:
Survey your garage area to see if you will need any of the following items:
• Wood blocks and/or shimming material.
- Used to mount the cable tension monitor.
• Fastening hardware.
- Alternate floor mounting of the safety reversing sensor will require hardware not provided.
• Extension brackets (Model 041A5281-1) or wood blocks and shimming material.
- Used to position the garage door opener during installation and for testing the safety reversing sensors if installed on
the wall or floor.