Use and Care Manual

10
• The appliance may stand alone, or it may be placed next to a cupboard or a wall. Consider the
clearance required to fully open the door to allow pulling out the drawers and shelves (see
installation diagram).
CONNECTING THE APPLIANCE
• Connect the appliance to the power mains using a connection cable. The wall outlet should be
fitted with a ground contact (safety socket). Nominal voltage and frequency are indicated on the
rating plate/label with basic information on the appliance.
• The appliance must be connected to the power mains and grounded in compliance with the
effective standards and regulations. The appliance will withstand short-term deviations from
the nominal voltage, but not more than +/- 6%.
min
50
mm
600
mm
710
mm
ma
x
90
°
514483
717
mm
669
mm
1176
mm
1224
mm