Owner's manual

Front Panel Controls: (Left to Right)

Switch general rule: When the switch is moved toward the function label,

the feature is selected.

Power-

This switch applies power to the unit.

(When the optional CPS-

1 is used this switch is inoperative and the power is controlled by the switch on

the CPS-1)

300/1.2K Ohm-

This switch selects the microphone input impedance to

either 300 or 1,200 Ohms.

48V Switch-

This switch supplies 48VDC (Phantom Power) to the

Microphone Input XLR jack.

DI Switch-

This switch routes the Direct Input jack into the unit.

Microphone / Line sensitivity-

This pot controls input level for the microphone and

line inputs. The microphone and line inputs have their

own input connectors on the rear panel and a separate

input transformer. Each rear input has its own section

of the control on the input gain selector switch. The

microphone section provides 20 to 80dB of boost in